Laser

Brake wind back adaptor for all Rover rear calipers 3/8D.3/8D.Double sided with 4 pins - 5mm square pin / 21mm centres & 3.5mm square pin / 29....

Brake wind back adaptor for all Rover rear calipers 3/8D.3/8D.Double sided with 4 pins - 5mm square pin / 21mm centres & 3.5mm square pin / 29....

Brake wind back adaptor for all Rover rear calipers 3/8D.3/8D.Double sided with 4 pins - 5mm square pin / 21mm centres & 3.5mm square pin / 29....

Brake piston retractor No. 17 covers Peugeot 206 CC, HDi, GTi vehicles with wind back pistons.Applications: Peugeot 206 CC, HDi, GTi vehicle.16mm s...

Brake piston retractor No. 17 covers Peugeot 206 CC, HDi, GTi vehicles with wind back pistons.Applications: Peugeot 206 CC, HDi, GTi vehicle.16mm s...

Brake piston retractor No. 17 covers Peugeot 206 CC, HDi, GTi vehicles with wind back pistons.Applications: Peugeot 206 CC, HDi, GTi vehicle.16mm s...

A portable, self contained, pressurised brake bleeder which is powered from the vehicle's 12V battery - the output pressure is adjustable up to a m...

Part of a range of vehicle specific tools for the removal and fitting of bushes and ball joints without having to remove suspension legs, subframes...

This tool provides one holding tool which stops the camshaft pulley rotating and the socket tool to loosen and tighten the cam pulley retaining rin...

Camshaft control valve removal tools, with innovative double sided design, for use on TFSI and TSI petrol engines to remove the camshaft control va...

Set of 5 camshaft adjustment tools in one kit. Equipped with square 3/8D for the removal of 3- and 4-way central camshaft adjustment valves.Applica...

Required when replacing timing belts or performing any cylinder head repair or maintenance work. Specifically designed for the 2 valve 620cc, 695, ...

Used to lock the camshafts in their timed position when replacing the cam belts and cam drive pulleys.Covers 3 valve models from 2005 to 2007.Size:...

This camshaft locking device simply slides between the 2 camshaft pulleys on 16 valve twin cam engines.Rover K series enginesOEM Toolcode 18G 1570M...

This kit is designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van. Use when checking and setting the valve...

Camshaft pulley alignment pins for Ford 2.0L diesels with engine code DW10F. Designed to lock the belt-driven camshaft pulley on the Ford 2.0L Dura...

The Subaru flat four engines listed below have 4 camshafts (2 per side) and replacing timing belts can be challenging when working alone. The 7685 ...

The kit is designed to lock the camshafts on the Vauxhall engines listed in the applications provided. Plates are oversized to prevent the valve co...

Used to lock the camshafts in their timed position when engine repair or rebuild requires the cam pulleys to be removed and timed.Used to lock the ...

This kit provides the essential clips and pins that allow the camshafts to be removed and fitted when working on the 1.8/2.0lt TFSi Turbocharged 4 ...

Aids the removal and replacement of cam followers on 8 valve engines.Applications: Vauxhall/Opel.Equivalent to OEM KM-565-A.Essential tool for cams...

Camshaft VVT actuator wrench for BMW, used to replace leaking actuator seals or when the camshaft requires removal. The wrench is designed to latch...

A 6 point, castellated socket designed to fit the ball joints used on Volvo B9, B11 and B12 bus and coach chassis.3/4D, ID 100mm. Impact gun safe.6...

A 6 point, castellated socket designed to fit the ball joints used on Volvo B9, B11 and B12 bus and coach chassis.3/4D, ID 100mm. Impact gun safe.6...