Specialist Tools

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

Five piece set of ball joint splitter forks, for use with an air hammer rather than by hand.Sizes: 20mm, 24mm, 30mm, 35mm and 42mm.For use with the...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

This front axle ball joint extractor/installer can be used insitu, saving valuable time and money.Specifically designed for Volkswagen Transporter ...

An anti-roll bar ball-joint remover for Volvo commercial vehicles (specifically FM12) which is suitable for both front and rear ball-joints; 18mm h...

For separating ball joints this tool uses the forked, leverage method.For separating ball joints this tool uses the forked wedge principle.Designed...

For separating ball joints this tool uses the forked method with extra length giving added leverage.Extra long fork for better leverage.Designed to...

A 6 point, castellated socket designed to fit the ball joints used on Volvo B9, B11 and B12 bus and coach chassis.3/4D, ID 100mm. Impact gun safe.6...

A 2pc set of offset ball joint wrenches designed for the removal and installation of both the upper and lower ball joint nuts on Mercedes models fi...

A Spline bit specifically introduced for VAG brake caliper bolts.Applications: ball joints on Volkswagen LT, Transporter, Touran and rear caliper b...

44mm single hex (6 pt) deep 3/4D impact socket suitable for Citroen, Peugeot, Toyota Proace Van ball joints (from 2016).Applications include: Citr...

This 44mm single hex 1/2D deep impact socket has been selected specifically to fit the front lower suspension ball joints used on the PSA, Toyota, ...

A 1/2D ball joint socket for the removal and fitting of screw-in type front lower ball joints on Renault Twingo. To assist in removal Laser Tools s...

A 1/2D ball joint socket, equivalent to OEM 99357151, designed for removing the castellated fixing ring on the upper ball joint as fitted to the Iv...

Required for turning and releasing the lower ball joint to free corrosion etc.Applications: Audi A4 (from 2007), A5 (from 2009), A6 (from 2011), A7...

Ball joint separator supplied with a hydraulic ram.Jaw sizes: 30, 34, 40mm.Maximum pressure for ram: 12 tonne.Safety pin fitted to break when maxim...

The Volvo front ball joints are mounted in such a way that access is very tight for the use of traditional ball joint breakers. The Laser 8589 is s...

Scissor type heavy duty ball joint separator. For use on a wider range for track rod ends and anti-roll ball mountings and ball joints.Jaw size: 20...

Heavy duty, scissor type ball joint separator, ideal for more robust applications.Jaw size: 19mm (width), 25mm (depth); maximum opening: 60mm.Thrus...

For separating ball joints this tool uses the scissor method.Jaw size: 30mm (width), 18mm (depth); maximum opening: 50mm.Removes ball pin housing o...

Hydraulic ball joint separator - 8 tonne capacity.Jaw size: 22mm (width), 30mm (depth); maximum opening: 56mm.Spindles maximum torque pressure 40Nm...

Large sized fork and wedge type ball joint breaker, internal jaw size 35mm for larger ball joints as fitted to light commercials' and 4x4.Jaw width...